Pinty Compact Tactical Red Laser Sight with Picatinny Mount Alan Wrenches for Hunting - Easy and Bright

Awesome laser great for pistols,blowguns and just about anything u can put it on, also I would highly recommend these lasers the quality is superb and the price is cheap.

Bare with me, I'm making a very serious point here. This is a very good product and maybe this will help you have an easy installation...because it is so simple, the manufacturer didn't send instructions.The accessories that are out nowadays are a THIRD of the size of the same accessories, from just a few years! Now, everything is scaled down, AND THEY WORK BETTER!. I swapped out my very finicky Simmons high percussion scope; that thing would get knocked off if you so much SNEEZED on it!! I replaced it with a quality, tough little Quick Reflex Scope, DANG! What a difference that made.BUT, I had to get rid of the cumbersome old laser too. I didn't have room on this carbine to put it on, without looking junky again.So, when I was looking for a laser, for some reason, I just kept coming back to this same little laser. Aluminium casting. All metal. It fit on my picatinny. And the little --click-on, click-off-- switch worked perfectly. It mounted in a place near my thumb:You will have MUCH MUCH better results if you put this laser on the top rail, or the bottom rail. If you try to SIDE MOUNT this laser, it will not zero in right. It's very important to keep it inline with your rifles barrel...IMPORTANT: The two small set screws in the front of the laser? IT IS VERY IMPORTANT to turn ONE SET SCREW STRAIGHT UP, and the other set screw STRAIGHT OUT TO THE SIDE! SO, when you adjust it, it will be --just a bit up or down...and the sideways set screw will be just a tad left, or right. You see what I mean? If you just put this thing on any old way, and the set screws are off horizontally AND vertically, your going to be very frustrated as you try to "zig and zag" around. Aggravating as hell! Think about that a minute. You set the laser so that it will adjust in a cross pattern, instead of a diagonal one...If ya need help, just leave a comment.EASY TO SET UP.!! Put batteries in, but before you turn it on, look at the tiny hole that the beam will be coming out of......Using the small allen wrench, get it as.close to center as you can. Put the laser site on the rail, JUST BARELY SNUG IT. It will be REALLY CLOSE BUT YOU'LL PROBABLY HAVE TO FINE TUNE IT. Then carefully tighten everything to stay. You may have to wiggle and tighten it up a few times, so it will settle properly. I have bought one of these for everything I've got. Works great on a pistol as well. I'm even thinking about trying one on my Long Bow.

First of all, when I opened the shipping box and looked at it, it looked to be someone else's return. There were two holes through the blister pack were a staple had been, but the staple was not there. If there were instructions, they aren't there now. Both Allen Wrench's had wear on them as if they had been used. And as for adjusting for Windage and Elevation, the one Allen screw was fine but the other was screwed in at an angle and would not come out. But with a little patience and TLC, I was able to remove it and screw it back in properly. They both work now and adjustment can be made.The one thing positive about this item is that the batteries weren't DOA and the laser did turn on and off like it should. I haven't installed it yet, so I can't review that or how it holds up to recoil.To be honest, what did I truly expect for $15.99? When I want a higher quality laser, I know what to buy and what it's going to cost. I think I will use this around the house to exercise my two dogs. They love chasing laser light dots.Update 10/03/2020 - I was contacted by the seller (Banyan Imports) about my review. They seemed genuinely concerned about my satisfaction with this product. They informed me that my review had been passed onto their QC Dept. and also to their supplier. They also offered me a Refund (which I choose) or a Replacement item. Within a couple days, I had the refund. They stand behind their products and their customers satisfaction. I have changed my rating to a 4 Star because of their support of their product.

I have my red dot sighted far, and this laser bore-sighted at 30ft for closer targets. I find the quality is very good, and mounted easily to the rails. I have fancier lasers on my pistols (Crimson Trace and ArmaLaser), and a pressure activated laser on my shotgun, but I appreciate the simplicity of the "click" on-off function for my use case. I have not had a problem with any loss of calibration with multiple rounds (or going in and out of the gun safe) from either my 5.56 or my break barrel .22 air rifle.

It’s a pretty good laser like it goes far and it gives you all the things you need and the price is good but the only problem is that you can’t adjust it to line up with the sights so it’s just a normal laser that goes straight with the gun so basically where you aim depending on where it is (mines on the bottom), anywhere I aim I shoot above it.

I posted an an initial review and must offer Plenty an apology. I said that after firing airgun the thing would turn off. Turns out it was user error. After a slight tightening of the batter cap/switch older, the thing works fine. I do think still a bit tricky to drop in the batteries to keep the polarity correct. This as a nice little sight and I find to be quite accurate.

Took way too much time to put in 3 separate batteries to get them lined up with each other. Either 1 single battery or AC charger is the best. Forget this garbage, this one is not worth keeping.

The illuminated sight is almost impossible to sight in. Using a little creativity and a mounting kit from a competitor, it mounts well.

Seems very sturdy and really good quality for the price. Switch on rear is simple but a bit hard on your finger. Easy to install and adjust.

Very easy to setup and use !

Just setting up scope but I'm starting to center it Don't know about battery life. Good value for the money. Works great on pistol bb gun. Things have changed after using for awhile. Pinty stopped working yesterday. Thought it was the battery so I boght new ones today. They don't work either. Either wrong battery or Pinty died for good. ( energizer 357. No.357/303.) This is the right number after checking. Many things I have purchased from Amazon have worked well up to now.

Added this to a low end co2 pistol. Makes accuracy 100% better. Lights Is not super bright but bright enough to used in sunny conditions.

Unfortunately, doesn't fit tight enough.