Front Bumper Lip Front Spoiler Front Wing Fit for Tesla Model Y Accessories 2020 2021 2022 2023 2024 (Matte Carbon Fiber Pattern)

Fitment is flawless. Installed on my 23 MYP. Did not have to screw into the paint at all, only the plastic underbelly. Used masking tape to hold lip in place while I screwed into the pre-drilled holes. Easy took 15 mins. I also added 2 additional screws on each side (not pre-drilled) as extra support but they are not needed I just wanted to reduce as much flex as possible. No tape needed either. After temporarily mounting with the screws, went to Home Depot and got some 3/4" bolts, lock nuts, 1" washers. Lip is solid and not going anywhere. Took the screws that came with the kit out and did not use them nor do I trust or recommend using them. They will rip right out. Ceramic coated for extra protection. Looks amazing and completely changes the whole soccer mom look of the front of the car. Looks like how a performance model should look. Does slightly lower the car in the front. If I end up bottoming out or damaging anything I will just replace with another one being they are so inexpensive (less than $100). Highly recommend but only if you trash the screws that came with the kit and install with your own bolts and washers.

Look good but the adhesion didnt last, it came off after couple month of use and broke the under part of my car, sadly and dissatisfied.

Good for and looks good on my MY

Super impressed with this front lips. Install easy easy and I recommend using a screw driver since you’re screwing into soft plastic. Double up on the included double sided stick tape on each side and follow the lines o. The bumper for perfect alignment. Carbon looks perfect with stealth grey.

You can use their provided screws to put the three pieces together, but once you install on car, I would suggest using your own slightly larger black screws. Also, under the front there are four plastic splash guard clips that you will have to pull out and they provide new ones. Don’t use those. Go to Ace Hardware and get your own bigger, longer, plastic ones to replace. Makes it much easier.

The splitter is great for the price, but I would advise not to the double side tape that's included. Go to lowes and buy some Scotch-Mount Extreme Double-Sided Mounting Tape 1-in x 33.33-ft Double-Sided Tape.

I recently purchased the Front Bumper Lip from Amazon and unfortunately, it turned out to be a complete disaster. In just the first week of installation, the Front Bumper Lip flew off while I was driving, leaving me with only a side piece and multiple holes under my brand-new $60k Tesla Y.Although the material used to manufacture the Front Bumper Lip was of good quality, it lacked the necessary support to hold it in place. I strongly suggest the seller change this product's installation mechanism or design. As it stands, it is extremely unsafe and puts drivers and other vehicles on the road at risk.I am extremely disappointed with this purchase and would never recommend this product to anyone unless they fix the installation issue. I would go as far as to say that this product is potentially dangerous and not worth the money. Furthermore, I believe the seller should be held accountable for the damages caused to my car and I will be seeking a full refund for this disastrous product.

I did this myself, recommend a friend only so it’s 100% straight. Absolute no issues with install, did not fall off while weaving through traffic. My product was perfect glossy look is what I’m looking for.