YOUSU 3D Printer Filament Galaxy PLA Filament 1.75mm, 3D Printing Filament Bundle, Multi Color PLA Filament Glitter 250g X 4 Color Pack.

Pleasantly surprised! Printed some dragons and they look great! Changing the orientation of the print will yield different colors. See video. The yellow comes out more of a gold and the red is more of a magenta. You'll get shades of purple and green as well. Rainbow filament basically. Structurally, same as any other silk filament. As in, more brittle than normal. Pay attention to the geometry that the slicer outputs. With dragons for example, you want your links to be at least 4 lines wide (1.6mm) or the kids will snap the plastic. Bed adhesion is as expected. I have a Ender 3 V2 with a glass bed. Needs gluestick for this filament. Temperature tower showed 200 as the optimum temp. Anything higher and you get whiskers and strings everywhere. The spool I got shows no issues of tangles and color orientation looks consistent throughout (there are windows on the spool) What can you print with this? Mostly larger curvy organic shapes. Large flat surfaces don't look that good as the color gets splotchy. Flat tops and bottoms just look like rainbow noise. Small details as well. The just look grey from farther away. To summarize, with the right model, results are top notch.

I am seriously impressed with this TPU combo pack! The colors (Blue, Green, Yellow, and Purple) are super vibrant in normal light, and the glow-in-the-dark effect is just incredible. I printed a set of gummy bear models to test it out, and they came out looking amazing both in the light and when glowing. The filament feeds smoothly, has great layer adhesion, and is flexible without being too tricky to work with. The glow lasts a surprisingly long time once it’s charged up under light, and each color has its own unique glow effect that really stands out. This pack is a perfect mix of fun and quality—I love having multiple color options in one set. If you’re looking for a TPU that’s flexible, reliable, and also adds some serious wow factor with glow-in-the-dark, this is the one to get. Highly recommend!

Really good to use. Beautiful glow. Prints nice and smooth.

So far have only used the blue and purple. Were first time 3D printer users and I like this filament, I am disappointed the blue glows but the purple doesn’t. And the purple isn’t that dark of a purple.

While I absolutely loved the 3 glitter filaments, I have to leave off a star because I could not use the color shifting roll. The color shifting filament roll that I received was so brittle, it would break just coming off the roll straight to my extruder and I couldn't print with it. However, I am very impressed with the strength and color of the 3 glitter rolls. I've never had a glitter filament to print well for me, but these did great once I tweaked my temps. They are also much stronger than most of the other pla filaments I've used. I love the sparkle and it takes a lot more force to break even small prints, than any of the other pla filaments I have used. While a slightly larger nozzle is recommended, I had no issues printing with a .04 nozzle. It does tend to be a bit stringy but I found it prints pretty well at a lower temp. I printed this little articulated spider on 190. There is still some minor strings but nothing that isn't easily removed. I am hoping to see large rolls of this glitter filament soon.

Exceptional filament. The best TPU I've ever used. Just enough rigidity and softness for any project out there. My go-to for any TPU now and forever. No problems printing whatsoever. I used a 0.4 nozzle at 0.08 layer line and it printed flawless. Extraordinary consistency. Roll after roll. I had absolutely no issues. Other manufacturers definitely fall short. This is the best TPU I've ever used for anything in my print farm

I loved the way the filament behaved in printing... no problems at all. beautiful prints all of them, very detailed on the winged dragon. both filaments, the glow-in-the-dark green and black golden glitter are beautiful filaments, but unfortunately that's where the similarities end. the Glow-in-the-dark green turned out more black with a slight green hue... and even leaving it the sun all afternoon to charge the glow, it did not glow at all! So I decided to try the Black Gold glitter... That turned out beautiful, except for a little stringing, which is probably my printer. I would give the Black Gold glitter a 5 and the Glow-in-the-dark a 3.5 or 4 for not doing as advertised! as a side note... i noticed other people not having success with the glow feature...

filament prints stringy and depending on what you are printing and it's size, it may fuse.on Bambu, even at the recommended temperature. aside from the store does anyone know where I can buy bambu filaments?

I ordered the Galaxy Black and although thats what the reel says I am pretty sure this must be the old Glitter Black because its more like a mid-grey sparkle. Its printing ok though and wasnt for anything important.

Tolles Filament mit einem schönen Farbspiel. Leider sind die Rollen breiter wie die Rollen anderer Hersteller. Sie passen zwar gerade so in das AMS vom Bambulab X1C, scheuern aber an beiden Seiten und deshalb kommt ständig die Fehlermeldung "AMS-Hilfsmotor überlastet". Das nervt und trägt auch nicht zur Haltbarkeit des Hilfsmotors bei. Entweder über die externe Filamentzuführung nutzen (nicht immer unbedingt sinnvoll), umspulen (mache ich ungern) oder einfach die Finger davon davon lassen (meine Empfehlung, wenn das AMS von Bambulab beenutztz wird).

Ottimo filamento TPU, stampa con settaggi generici con BambuLab X1C perfetti!

Well worth the money